CBDZD - COPPERMATE PASTE SOLDERING FLUX
- MSDS: CBDZD
- Manufacturer: M C CANFIELD SONS
- Product Name: COPPERMATE PASTE SOLDERING FLUX
- National Stock Number: 3439-00N066908
Product Identification
Product ID:COPPERMATE PASTE SOLDERING FLUX
MSDS Date:04/01/1994
FSC:3439
NIIN:00N066908
MSDS Number: CBDZD
Responsible Party
UNION, NJ 07083
US
Emergency Phone: 800-535-5053
Info Phone: 908-688-5050
Cage: GO013
Contractor
Telephone: (201) 688-5050
Cage: GO013
Ingredients
ZINC CHLORIDE (SARA 313) (CERCLA)
CAS: 7646-85-7
RTECS: ZH1400000
Fraction By Weight: 10-20%
OSHA PEL 1 MG/M3
ACGIH TLV: 1MG/M3/2STEL(FUME)95
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
PETROLATUM; (TECHNICAL PETROLATUM)
CAS: 8009-03-8
RTECS: SE6780000
Fraction By Weight: 40-50%
OSHA PEL N/K
ACGIH TLV: N/K
AMMONIUM CHLORIDE (CERCLA)
CAS: 12125-02-9
RTECS: BP4550000
Fraction By Weight: 1-10%
OSHA PEL 10 MG/M3
ACGIH TLV: 10 MG/M3 FUME; 9495
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: CAN BE IRRITATING TO EYES &
MUCOUS MEMBRANES. SKIN: SLIGHTLY IRRITATING. INGEST: DO NOT INDUCE
VOMITING, CONTACT PHYSICIAN. DO NOT INHALE - SEE INHALATION.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:IRRITATION TO SKIN, EYES, AND MUCOUS MEMBRANES.
Medical Cond Aggravated by Exposure:UNKNOWN.
First Aid
First Aid:IRRIGATE WITH COPIOUS AMOUNTS OF WATER. REMOVE CONTAMINATED
CLOTHING. CONTACT PHYSICIAN IMMEDIATELY. INGEST:CALL MD IMMEDIATELY
. INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF RESP
) . EYES:IMMEDIATELY FLUSH W/POTABLE WATER FOR A MINIMUM OF 15
MINUTES, SEEK ASSISTANCE FROM MD . SKIN:FLUSH W/COPIOUS AMOUNTS OF
WATER. CALL MD .
Fire Fighting
Flash Point Method:COC
Flash Point:400F,204C
Extinguishing Media:DRY CHEMICAL, CO*2, OR FOAM.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . WATER MAY BE INEFFECTIVE AS IT MIGHT CAUSE FOAMING WHEN
SPRAYED INTO HOT BURNING LIQUID.
Unusual Fire/Explosion Hazard:DENSE SMOKE MAY BE GENERATED WHILE
BURNING. CARBON MONOXIDE AND CARBON DIOXIDE MAY BE GENERATED. FUMES
MAY BE IRRITATING.
Accidental Release
Spill Release Procedures:DO NOT GET ON SKIN, IN EYES, OR IN CLOTHING.
AVOID BREATHING MIST AND FUMES. SHOVEL UP ALL MATERIAL IN APPROVED
CONTAINERS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:WASH ALL EQUIPMENT AFTER HANDLING.
WASH HANDS AFTER HANDLING.
Other Precautions:NONE.
Exposure Controls
Respiratory Protection:NONE FOR NORMAL USE. NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:MAINTAIN ADEQUATE VENTILATION.
Protective Gloves:RECOMMEND RUBBER GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA . APRON.
Work Hygienic Practices:WASH THROUGHLY AFTER USE; DO NOT TAKE
INTERNALLY.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Spec Gravity:0.86 (H*2O =1)
Solubility in Water:INSOLUABLE
Appearance and Odor:LIGHT AMBER - ODORLESS.
Stability
Stability Indicator/Materials to Avoid:YES
MAY REACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:KEEP AWAY FROM STRONG OXIDIZERS.
Hazardous Decomposition Products:HYDROGEN CHLORIDE, ZINC OXIDE.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE AND
LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.